Rayleigh衰落信道下一种实用的Turbo解码算法

通过理论和仿真实验证明:无论Rayleigh衰落信道是否完美估计,Max-Log-MAP算法都与信噪比无关,而且还与其他信道参数无关.通过缩放Max-Log-MAP算法输出软信息的幅度,在没有增加运算量的前提下,解码性能提高到了与Log-MAP算法相当的程度.由于缩放软信息的Max-Log-MAP算法不需要任何信道参数...     

BSC信道下线性分组码的差错概率下界分析

针对BSC信道,提出了一种线性分组码的最大似然译码差错概率下界的计算方法.根据最大似然译码算法原理,首先将译码差错概率转化为差错事件的联合概率,基于改进的Dawson-Sankoff界的优化准则,推导出BSC信道下线性分组码差错冗余事件的判决准则,最后得到差错概率下界的计算表达式.该下界只依赖于码字的Hamming重量...     

预报风强度对火箭最大气动载荷精度影响及建模分析

针对不同预报风强度的精度以及其对应的最大气动载荷预报值精度的研究文献极少。以某地区实况风为基准,分别对不同预报风强度的精度以及其对应的最大气动载荷预报值精度特征进行了分析,并利用多元线性回归方法建立了订正模型,结果表明在预报日数第1～11天,预报风强度越大,预报风精度及其对应的最大气动载荷预报值精度越高;利用多元线性回归方法可提高最大气动载荷预报值精度,且预报风强度越小,最大气动载荷预报精度提高越明显。这些发现在火箭发射前的飞行保障及安全决策方面具有参考价值。     

Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

利用矩阵求极大相容类的一种方法

寻找相容关系的极大相容类和简单图的极大完全子图，在解决二元关系与数据挖掘和管理决策中的具体问题时有重要作用。利用相容关系的极大相容类与简单图的极大完全子图之间的对应关系，对极大完全子图的路径长度进行分析，得到了关于极大完全子图路径长度的一个定理。并根据该定理构造了一个用矩阵的路径长度搜索简单图的极大完全子图的方法，进而利用该方法找出了对应相容关系的极大相容类。     

The logistic–exponential survival distribution

For various parameter combinations, the logistic–exponential survival distribution belongs to four common classes of survival distributions: increasing failure rate, decreasing failure rate, bathtub‐shaped failure rate, and upside‐down bathtub‐shaped failure rate. Graphical comparison of this new distribution with other common survival distributions is seen in a plot of the skewness versus the coefficient of variation. The distribution can be used as a survival model or as a device to determine the distribution class from which a particular data set is drawn. As the three‐parameter version is less mathematically tractable, our major results concern the two‐parameter version. Boundaries for the maximum likelihood estimators of the parameters are derived in this article. Also, a fixed‐point method to find the maximum likelihood estimators for complete and censored data sets has been developed. The two‐parameter and the three‐parameter versions of the logistic–exponential distribution are applied to two real‐life data sets. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

What you should know about simulation and derivatives

Derivatives (or gradients) are important for both sensitivity analysis and optimization, and in simulation models, these can often be estimated efficiently using various methods other than brute‐force finite differences. This article briefly summarizes the main approaches and discusses areas in which the approaches can most fruitfully be applied: queueing, inventory, and finance. In finance, the focus is on derivatives of another sort. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于频谱分析的飞行模拟器飞行性能验证

介绍频谱分析用于仿真系统模型验证的原理和方法,提出一种应用频谱分析进行飞行模拟器飞行性能验证的方案。结合飞行试验和仿真模型的输出数据,分别采用窗谱估计和最大熵谱估计方法对某型飞行模拟器的飞行性能进行验证,并对验证结果进行分析。结果表明,频谱分析法用于飞行模拟器飞行性能的验证是有效的,可为其他训练模拟器的性能验证提供参考。     

Two‐stage component test plans for testing the reliability of a series system

A system reliability is often evaluated by individual tests of components that constitute the system. These component test plans have advantages over complete system based tests in terms of time and cost. In this paper, we consider the series system with n components, where the lifetime of the i‐th component follows exponential distribution with parameter λ_i. Assuming test costs for the components are different, we develop an efficient algorithm to design a two‐stage component test plan that satisfies the usual probability requirements on the system reliability and in addition minimizes the maximum expected cost. For the case of prior information in the form of upper bounds on λ_i's, we use the genetic algorithm to solve the associated optimization problems which are otherwise difficult to solve using mathematical programming techniques. The two‐stage component test plans are cost effective compared to single‐stage plans developed by Rajgopal and Mazumdar. We demonstrate through several numerical examples that our approach has the potential to reduce the overall testing costs significantly. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 95–116, 2002; DOI 10.1002/nav.1051     

基于小波变换模极大值的自适应阈值图像去噪算法

依据白噪声小波变换性态与信号奇异性相比具有显著不同的特点,在大尺度下设置阈值,去掉噪声信号而保留图像细节信号引起的模极大值点。在阈值设置问题上,采用自适应阈值的方法,克服单一阈值不能在每级尺度上将信号与噪声作最大分离的缺点。实验表明,与单一阈值去噪方法相比,该方法不仅可以保留图像边缘信息,而且能提高去噪后图像的峰值信噪比2~5 dB。